Posts

Showing posts with the label Stress Strain

Topic -B) Bars of varying sections

Image
Let us see here the stress analysis of bars of varying sections Let us see the following figure, where we can see a bar of having different length and different cross-sectional area and bar is subjected with an axial load P. As we can see here that length and cross-sectional areas of each section of the bar is different and therefore stress-induced, strain and change in length too will be different for each section of the bar. Axial load for each section will be the same i.e. P. When we will go to determine the total change in length of the bar of varying sections, we will have to add the change in length of each section of the bar. P = Bar is subjected here with an axial Load A 1 , A 2 and A 3 = Area of cross section of section 1, section 2 and section 3 respectively L 1 , L 2 and L 3 = Length of section 1, section 2 and section 3 respectively σ 1 , σ 2 and σ 3 = Stress-induced for the section 1, section 2 and section 3 respectively e 1 , e 2 and e 3 = Strain developed for t...

Example- axial and shear deformation.

Image
A steel rod 20mm in diameter and 300mm long is subjected to an axial pull of 40 KN. If the young modulus is 2 x10⁵ N/mm². Calculate the elongation of bars.   ==> Given Data Dia. of rod =20 mm Length of rod = (L) =300mm Axial pull (P=F) = 40 KN P =40 x10³ N young modulus is(E) = 2 x10⁵ N/mm² Stress (σ) = P/A = {40 x10³ /[(π/4) x 20²]} σ= 127.324N/mm² Young Modulus = (E) = (σ / e) 2 x10⁵ = ( 127.324 /  e) e = 6.3662 x10㆒⁴ (i.e. e= δ L / L) 6.3662 x10㆒⁴  = ( δ L / 300) δ L = 0.190986 mm---Ans Check (δl) = {(P L) /(A E)} δl = [(40 x10³ x300) / ((π/4) x 20² x2 x10⁵)] δ L = 0.190986 mm---Ans ---x--- A cast column has an external diameter of 300mm and 20 mm thick. Find the safe compressive load on the column with a Factor of safety of 5. If the crushing strength is 550 N/mm²  ==> Given data Area = (π/4) x (300² - 260²) = 70371.674 mm ² Safe load=P=?      (F. Of  S. =5) Crushing strength = 550 N/mm²   Safe stress = (Crushing st...

Differences between ductile material and brittle material

  When an external tensile load is applied to a material, initially it undergoes elastic deformation and then plastic deformation starts. Elastic deformation is recoverable, while plastic deformation is permanent.  The ability of a material to exhibit plastic deformation before the fracture is an indication of ductility. Materials that show substantial plastic deformation under external loading are called ductile materials; while brittle materials exhibit negligible plastic deformation. Similarities and differences between ductile material and brittle material are provided below. Similarities between ductile material and brittle material Both are associated with the plastic deformation of the material under tensile loading. Ductility or brittleness is highly temperature-dependent. For example, a brittle material can behave like a ductile one at an elevated temperature. Similarly, a ductile material at room temperature, when frozen, can automatically convert into brittle materi...